The accessory pack includes a selection of sensors, actuators, and tools that work well with the Make Controller. We highly recommend this product for beginners to help get started straight out of the box:
| - Distance Measuring Sensor |
- Servo Motor |
| - Photocell Sensor |
- Stepper Motor |
| - PIR Sensor |
- Solarbotics Gear Motor 3 |
| - LED Block |
- Push Button - Black |
| - Slide Potentiometer |
- Make Connector Pack |
| - 9V Power Supply |
- Screwdriver |
|
|
Please note - the details for some items may vary. Please double check on the product page for each of the items in the accessory pack to be sure of what's included.
|
|
|
|
|
 |
Distance Measuring Sensor
The Distance Measuring Sensor can detect the distance of objects in front of it, within a range of 20-150 cm, or 8"-60"... more |
|
|
|
|
 |
Photocell Sensor
A photocell senses the level of light falling on it. Comes assembled & ready for immediate connection to the Make Controller... more
|
|
|
|
|
 |
Servo Motor
Hobby Servo Motor, 48.60 oz/in. torque. Great for small animations and small-scale control... more
|
|
|
|
|
|
Stepper Motor
Stepper motors are great for precision control in both forward and reverse directions, and this one has an excellent torque/size ratio...more |
|
|
|
|
 |
DC Motor - Solarbotics Gear Motor 3
This gear motor is very comparable to hobby servos, and have a 90 degree output shaft, offering 50 in*oz of torque, rotating 360 degrees every 1.6 seconds (38 rpm - just a hair slower than a servo)... more |
|
|
|
|
 |
PIR Sensor
The PIR (Passive Infrared) sensor is the same element used in many burglar alarm and motion-activated light systems. It's designed for human body detection, so it's great for detecting when somebody approaches your project. Detects motion up to 10 feet, and comes assembled with 1' wire leads, ready for immediate connection to the Make Controller... more |
|
|
|
|
 |
Slide Potentiometer
Wire assembled, ready for immediate connection to the Make Controller... more |
|
|
|
|
 |
LED Board
The LED Board is a simple output device that is very useful in monitoring the outputs on your Make Controller. The board has 4 LEDs on it, so all you need to do is connect them to the digital outs on the Make Controller Kit and you can get visual feedback when your outputs are on.
|
|
|
|
|
 |
Push Button - Black
Comes wire assembled, ready for immediate connection to the Make Controller... more
|
|
|
|
|
 |
Make Connector Pack
The green screw terminals on the Make Controller Kit can slip on and off the board. This allows you to wire devices to your connectors once, and leave them there. You can then simply swap connectors when changing devices, without the hassle of rewiring... more |
|
|
|
|
 |
9V Power Supply
Universal (international) input voltage: 100-240V. Output voltage 9VDC @ 1.7 Amps. Comes with a green Make Controller screw terminal plug.
|
|
|
|
|
 |
Screwdriver
Perfect size for the green screw terminals used on the Make Controller.
|
Shopping Cart
mcbuilder 0.5.0 available
Forgot your password?
New user?